MASH BUS Blog

SuperBrightLED.com Side Markers – Review

by on Mar.08, 2010, under Uncategorized

MARKER / CLEARANCE LIGHTS

Another chapter in our L.E.D. bus conversion was to change over the marker and clearance lights on the old MASH Bus.   We needed to replace 7 amber and 5 red light assemblies.  The original light assemblies were wedge shaped

We elected to purchase all new marker/clearance lights from SUPERBRIGHTLEDS.com.  They had a fair price and offered replacement light assemblies that were as close to a direct bolt in replacement as anyone could offer.

MBC Series Cab Top
Marker/Clearance Lights
Clearance Marker Light with 24 Super RED or AMBER LEDs
measures 1.25h x 2.5w x 3.375 inches
Grounded mounting hole and 5″ long positive wire
Current Draw: 0.150Amp (150ma)@13.5 VDC – PC RATED
DOT SAE Approved

Price: $9.95 each

Link to SUPERBRIGHTLEDS.com

We ordered online and paid with a debit card.  The lights were shipped USPS direct to us.  Upon initial examination the lights appeared to be fine, a bit lighter weight than the original assemblies but that is due to the fact that the original lights had a steel base plate and the new lights were all plastic.

Upon further examination one of the amber lights was damaged.  It appeared the light was damaged in manufacturing and somehow got through the QC before shipment.  One phone call and I had a new light shipped to me next day no hassle no muss no fuss, SuperBrightLEDs just shipped without issue.  SuperBrightLEDs customer service was GREAT.  The only requirment was to put the damaged light into a supplied envelope that was postage paid and send it back.  The best thing was SuperBrightLEDs shipped me the new replacement BEFORE I had to return the damaged light.  By not waiting to ship me the new light it allowed me to move forward with the project with little to no down time.

Each light came with a die cut foam pad and mounting screws.  The light assemblies had two mounting holes each with brass grommets.  Only one of the mounting hole grommets was grounded to the light assembly.  The positive lead of the light came directly out of the back of the unit.  The positve leads were all ready stripped on the end for connection, this was a really nice feature and made installation a snap.

Wiring was easy just clip off the old light assembly near the base of the light and use a butt connector to hook up the wiring harness lead to the positive lead on the new SuperBrightLED clearance light.  They only issue was we had to make sure we did not let go of the wiring harness lead as it might fall back into the bus body.  Twice we let the wiring harness lead fall back into the bus body and we had to use a coat hanger to fish out the lead.

After mounting the new lights came the moment of truth.  Were these SuperBrightLED marker lights super bright?  Well – in short – YES, they were very bright.  The 24 LED’s are placed in such a manner that they really make these light shine.  The marker / clearance lights are much brighter and the colors are more rich than the OEM equipment we discarded.

In conclusion, the lights are bright and we are very pleased with the lights but the customer service of SuperBrightLEDs has won us over as a customer because they were so easy to work with.  We hope in the future to be able to review more of their products here.

No comments for this entry yet...

Leave a Reply

You must be logged in to post a comment.

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...